hexTronik 24gram Brushless Outrunner 1500kv Bluewonder $13.95

Known as the Bluewonder this little power plant is rated as the number one foamie motor for planes up to 16oz. Smooth operation and realiable performance. great replacement for many of the GWS foamies.

*Motor comes with prop saver and mount.
*This motor may come in either blue or silver.

Brushless Outrunner Motor.
Kv - 1500
Load Current 9A
For more specifications, please click on more information.
Kv - 1500rpm/v
Max Load:  7A
No Load Current: .5A
Suggested Lipo: 3 cell 11.1v
Thrust: 400g+
Suggested Prop: 8x3.8

AX 2306N 1300kv Brushless Micro Motor $11.95

The 2306N is a very energy efficient brushless outrunner motor.
Works well on outdoor and indoor foam airplanes.
I will suggest a 8.4 prop when using a 11.1 lipo
and a 9.4 prop when using a 7.4 lipo.

AX-2306N-1300
Micro brushless motor
Comes with stick mount, as shown.

Spec.
Kv: 1300rpm/v
Lipo Range: 2-3 cell
Suggested prop: 8x4, 8x3.8
Best current range: 5~8A
Weight: 37g

Test Data;
Battery: 11.5v
Current: 8.55A
Propeller: 8x4
Thrust: 537g
Speed: 9950rpm

Turnigy 2730 Brushless Motor 1500kv $13.95

The 2730 is a very energy efficient brushless outrunner motor.

This motor works great in smaller formula racer style plans. with a 11.1 lipo 800mah and 8.4 prop it's a nice lite weight rocket motor.

This motor comes with the cross mount and prop saver with connection plugs. Plugs need to be soldered on.

Dimension: 32mm x 27mm, 43mm(with shaft)
Weight: 26g  (kv1500) (not including connectors)
Diameter of shaft:F3mm
Length of front shaft:F10mm
Lamination thickness: .2mm
Magnet type: 45SH

 
Thrust: 290~410g
Prop: 7x3.5 or smaller
ESC: 10A
Max Current: 4.5~8A
Lipo Cells: 2-3S

TowerPro 9g w12A Brushless Speed Controller $14.99

A great little 12A BESC, very light and very stable.
This is the newer generation, with a much smoother throttle curve.
The BESC weighs 9g, however if you change the wires and remove the heatshrink it can be around 6-7g

Rating: 12A Burst, 10A Constant
FET: 6
BEC: 1.5Amp
Timing: Auto
PWM: 8k
Lipo: 2~3
NiMH:4~12

Hobbyking SS Series 8-10A ESC $9.99

The Hobbyking SS series comes with a limited range of programming functions and are designed to be plug-n-play.
A perfect ESC for those looking for something simple to use and economic

Spec.
Weight: 6g
Size: 30x18x2mm
Cells: 2-3S (Auto Detect)
Max Current: 8A
Burst: 10A
BEC: 1A

Rhino 750mAh 2S 7.4v 20C Lipoly Pack $8.99

With this 7.4 750mAh lipo you can power any of the motors above with moderate power. Meaning your 14oz model will fly very scale "SLOW". This is great for beginners.

Using a 7.4 lipo will allow you to turn a larger prop also. I suggest the 9.4 APC prop when using the 7.4 750mAh lipo. With the 750 mAh, the flight times are around 15 to 20 minutes depending on throttle use. Flying at half throttle gives 20 minute fly times.

Rhino 750mAh 3S 11.1v 20C Lipoly Pack $13.99

*Lipo comes with JST plug and balance connection

With this 11.1 750mAh lipo you can power any of the motors above with performance power. Meaning your 14oz model will fly very sporty "GOOD VERTICAL".

Using a 11.1 lipo will mean you need to turn a smaller prop. I suggest the 8.4 APC prop when using the 11.1 750mAh. With 750 mAh the flight times are around 15 to 20 minutes depending on throttle use. Flying at half throttle gives around 20 minute fly times.

HXT900 9g / 1.6kg / .12sec Micro Servo $4.99

HXT900, one of the most famous and the best value micro servos available.
Used by tens of thousands of hobbyiests world wide. The HXT900 is the #1 trusted low cost 9g servo. 

HXT500 5g / .8kg / .10sec Micro Servo $4.99

HXT500, one of the most famous and the best value micro servos available.
Used by tens of thousands of hobbyiests world wide. The HXT500 is the #1 trusted low cost 5g servo. 

OUT OF STOCK!!!

Turnigy Accucel-8 150W 7A Balancer/Charger $64.95

The Accucel-8150 is a Lipoly/LiFe battery charging workhorse. Capable of handling up to 8S, 7A or a maximum of 150W charging current plus it balances and discharges packs which is critical for keeping your expensive batteries in perfect condition.
This charger has a 12v input and can be used with a mains 12v power supply or your car battery when at the field.
TURNIGY Accucel chargers are built with quality components and produced in robotic pick-n-place SMT technology machines to produce a reliable and accurate charger.
You wont find a better priced quality 8 Cell charger!

The Accucell has various programming and charging modes and will accept and safely charge NiCd,Lilo, Lipo, LiFe, Pb batteries.

Spec.
Operating voltage range: 11.0~18.0Volt
Circuit power: max. 150W
Charge current range: 0.1~7.0A
Discharge current range: 0.1~5.0A
NiCd/NiMH battery cell count: 1~27 cells
Lithium bettery cell count: 1~8 Series
Pb battery voltage: 2 to 36V
Weight: 625g
Dimensions: 170X125X35mm

*Kit includes temp sensor!

This charger has a JST-XH charge plug, which makes it compatible with Zippy, TURNIGY and any pack with a JST adapter.

Note: Power supply not included.

Turnigy Watt Meter and power Analyzer $28.95

The TURNIGY watt meter is a very accurate R/C amp/watt meter.
Predict model airplane flight time with any given propeller. 
Ensure peak currents are safe for motor, ESC, wiring and connectors 
Check battery health and performance.
Evaluate R/C battery charging efficiency. 
Choose the best propeller or gearing and the most efficient motor 
Check for wiring and connector power losses 
Measure power and energy consumption of ANY device with a battery

Included;
1 x 2.4Ghz transmitter
1 x 2.4Ghz Receiver
1 x Bind Plug
1x Manual
Note:
Only HK-8X receiver is comptible with HK-7X transmitter.
Only HK-8R receiver is compatible with the HK-6X transmitter.

GWS Slow Fly Prop 8x4 $3.50

Get #3 GWS slow fly props for $3.50 Light weight durable and a perfect match for any Lipo Pilot plane kits. 

GWS Slow Fly Prop 9x4 $3.50

Get #3 GWS slow fly props for $3.50 Light weight durable and a perfect match for any Lipo Pilot plane kits.